Important Notice

Astro Repeater is a GENOME Component and as such requires a Two notes account and a full license to GENOME in order for the component to be used in a full-featured state. For pre-purchase demonstration purposes, Astro Repeater can be demo’d for free within both a full-GENOME license variant and the 14-day GENOME trial accessible here. To obtain a full GENOME license, please head to GENOME.Two-notes.com.

Introduction

The complete electronic version of this manual, and the related Astro Repeater software application, are subject to updates without notice. To download the most up-to-date manual for Astro Repeater and GENOME - alongside user guides for all Two notes Audio Engineering products - head over to the Two notes Audio Engineering website.

This manual describes the use, features and functionality of Two notes’ Astro Repeater in tandem with the GENOME plugin application, detailing comprehensive instructions for its intended operation. It is highly recommended that you read this document before using the software. The contents of this manual have been thoroughly verified and is believed, unless stated otherwise, to accurately describe the product at the time of download availability from the Two notes Audio Engineering website.

Two notes Audio Engineering is a registered trademark of: OROSYS SAS 76 rue de la Mine 34980 Saint-Gély-du-Fesc France Tel: +33 (0)484 250 910 Fax: +33 (0)467 595 703 Contact and support: http://helpdesk.two-notes.com Website: http://www.two-notes.com

This document is the exclusive property of OROSYS SAS. In the interest of product development, OROSYS SAS reserves the right to change technical specifications, modify and/or cease production without prior notice. OROSYS SAS cannot be held responsible for any damage, accidental or otherwise, that results from inappropriate use of both the Astro Repeater PEDAL Component and the GENOME parent application. Please refer to the safety instructions, installation guidelines, licensing, free trial, and minimum software requirements included in the full GENOME User Guide for further reference pertaining to Astro Repeater’s parent application GENOME.

The reproduction of any part of this document is strictly forbidden without the written authorization of OROSYS SAS.

All product names and trademarks are the property of their respective owners. Product names and trademarks found in this document were used during the development of GENOME but are in no way associated or affiliated with OROSYS SAS.

What follows below is a TWO NOTES AUDIO ENGINEERING SOFTWARE LICENSE. Please read this agreement carefully. By installing, copying or using all or any portion of the software you accept all the terms and conditions of this agreement. If you do not agree with the terms of this agreement, please do not use the software. If you agree with the terms herein, please retain the document as it is your proof of license to exercise the rights granted herein. The SOFTWARE may include product activation and other technology designed to prevent unauthorized use and copying. This technology may cause your computer to access the Internet.

“TWO NOTES AUDIO ENGINEERING ” refers to the company OROSYS as identified in the Legal Notice, responsible for Website management of www.two-notes.com and associated online orders “COMPUTER” means a physical or virtual device that accepts information (in the form of digitised data) and manipulates it for some result based on a program or sequence of instructions on how the data is to be processed.

“SOFTWARE” refers to the music software developed and marketed by TWO NOTES AUDIO ENGINEERING on which TWO NOTES AUDIO ENGINEERING grants licenses. The SOFTWARE includes DynIRs (Virtual Guitar- and Bass-Cabinet emulations), GENOME Components (PEDALS, STUDIO FX, TSM Amplifiers) Wall of Sound, GENOME and other proprietary software such as Torpedo Remote & Desktop Remote).

“END USER” refers to any individual who has been regularly granted the right to use TWO NOTES AUDIO ENGINEERING’s SOFTWARE either acting as a TWO NOTES AUDIO ENGINEERING customer or as a person duly authorised to use the SOFTWARE by a TWO NOTES AUDIO ENGINEERING customer.

LICENCE TERMS, applying to TWO NOTES AUDIO ENGINEERING’s customers as set forth in TWO NOTES AUDIO ENGINEERING’s general terms and conditions, hereinafter the TERMS AND CONDITIONS. To that extent, it is reminded that:

TWO NOTES AUDIO ENGINEERING and its suppliers owns all intellectual property in the SOFTWARE, including but not limited to patents, data, secrets and graphical elements. The SOFTWARE is licensed on a non-exclusive basis. TWO NOTES AUDIO ENGINEERING permits you to install and use the SOFTWARE only in accordance with the term of the LICENSE TERMS. You must not copy any written material accompanying the SOFTWARE. You agree not to use any TWO NOTES AUDIO ENGINEERING trademarks, brand name or logos without prior written consent of TWO NOTES AUDIO ENGINEERING.

At your choice, you may download a 14-day free demonstration SOFTWARE version of the TWO NOTES AUDIO ENGINEERING GENOME SOFTWARE. The license on this trial version shall apply during the entire period of evaluation. The 14-day demonstration SOFTWARE must only be used for the purpose of evaluation, not for commercial use.

If the SOFTWARE is an upgrade or update to a previous version of the SOFTWARE, you must hold a valid license to such previous version in order to use such upgrade or update. By using an upgrade or update, you agree that you no longer have the license to use any previous version of the SOFTWARE. Upgrades and updates may also be separately licensed to you by TWO NOTES AUDIO ENGINEERING in accordance with the applicable LICENCE TERMS at the date of subscription.

Any permitted copy of the SOFTWARE must contain the same copyright and other proprietary notices that appear on or in the SOFTWARE. You may not modify, adapt or translate the SOFTWARE. You will not reverse engineer, decompile, disassemble, derive or otherwise attempt to discover the source code of the SOFTWARE. You may not rent, lease, sublicense, assign or transfer your rights in the SOFTWARE, or authorize any portion of the SOFTWARE to be copied onto another individual or legal entity’s COMPUTER except as may be expressly permitted herein.

Unless otherwise provided in the TERMS AND CONDITIONS, you may not transfer your rights to use the SOFTWARE. You may not use the SOFTWARE in any manner that infringes the intellectual property or other rights of another party. You may not transfer education, pre-release or Not For Sales (NFR) copies of the SOFTWARE.

Except for the remedy offered by TWO NOTES AUDIO ENGINEERING to its customers according to the TERMS AND CONDITIONS and any remedies that cannot be excluded or limited under law, TWO NOTES AUDIO ENGINEERING, its affiliates, suppliers, or certificate authorities will not be liable to you for any loss, damages, claims or costs whatsoever including any consequential, indirect or incidental damages, any loss of profits, loss of savings, loss of business information or other pecuniary loss, any damages resulting from business interruption, personal injury or failure to meet any duty of care, or claims by a third party, even if a TWO NOTES AUDIO ENGINEERING representative has been advised of the possibility of such loss, damages, claims or costs.

If you are a consumer who uses the SOFTWARE for only personal non-business purposes, then this agreement will be governed by the laws of the state in which you are residing. If you are not such a consumer, French law shall govern the interpretation and enforceability of this agreement. If any part of this agreement is found void and unenforceable, it will not affect the validity of the balance of this agreement, which remains valid and enforceable according to its terms. In the absence of a specific agreement signed by you and TWO NOTES AUDIO ENGINEERING, this agreement shall be the sole and complete agreement between you and TWO NOTES AUDIO ENGINEERING, regarding the SOFTWARE.

OROSYS SAS is not obligated to furnish or make available to you any further information, software, technical information, know-how or support. OROSYS SAS reserves the right to modify the SOFTWARE, and all materials provided hereunder, without further notice.

The big brother to GENOME’s ever-popular Dupe Delay, Astro Repeater is the lovechild of two of the most sought-after pedal-format delay effects, making this a bonafide essential in your GENOME backline. Taking inspiration from MXR®’s legendary Carbon Copy and DOD®’s iconic Rubberneck, expect the epitome of quintessential BBD sonics, all packaged in a fuss-free PEDAL component format.

The following parameters are available within the Astro Repeater Component

• TAPE SENSITIVITY: Drives Astro Repeater’s input stage resulting in increased tape saturation applied to the affected signal
• TAPE WEAR: Provides two modes of operation for “NEW” and “WORN” tape, each resulting in pre-designated settings for wow, flutter, distortion & EQ
• HEAD CONFIGURATION: Selects one of 7 distinct Head Configuration presets, each correlating to both the number and combination of playback heads being used to simulate the Tape Echo effect. Note, the head configuration selected can be manipulated and adjusted further using the ACTIVE HEADS (1-3) buttons
• ACTIVE HEADS (1-3): Manually defines the number of active playback heads being used to simulate the Tape Echo effect, Note, the manual head configuration selected can be overwritten by selecting a new HEAD CONFIGURATION preset via the related dial
• TIME LCD READOUT & COMPANION MODE SWITCHES: Indicates the delay time, either in ms, or subdivisions of the beat, depending on the MODE selected:
  • ms Mode: Manually sets the delay time from 1ms - 8000ms
  • Note Mode: Sets the delay time to subdivisions of the beat from 1/64 to 8/1
  • Dot Mode: Sets the delay time to dotted subdivisions of the beat from 1/64d to 8/1d
  • Trip Mode: Sets the delay time to triplet subdivisions of the beat from 1/64t to 8/1t
• ECHO TIME: Sets the delay time in accordance with the instantiated Delay Time MODE
• FEEDBACK: Controls the number of delay repeats, or the 'regeneration' amount
• BASS:: A global parameter that Increases the amount of low-frequency content audible in the affected wet signal
• HIGH CUT:: A global parameter that Increases the amount of high-frequency content audible in the affected wet signal
• ECHO:: Sets the affected ECHO Level relative to the configurable Spring REVERB and CHORUS levels
• REVERB:: Sets the affected Spring REVERB Level relative to the configurable ECHO and CHORUS levels
• CHORUS Sets the affected CHORUS Level relative to the configurable ECHO and Spring REVERB levels
• WIDTH: Adjusts the stereo width of the REVERB and CHORUS effect
• WET MIX: Controls the volume of the Global effected signal (inclusive of REVERB, ECHO and CHORUS) relative to the input signal

Should you encounter a problem with your product or need general assistance regarding your purchase, Two notes Audio Engineering has developed an on-line service to provide you with fast and efficient technical support, the Two notes Help Desk. Here you can submit a ticket and a member of our support team will be glad to assist you in your enquiry.

In addition, for common questions and general reference, don't hesitate to browse the Knowledgebase.

Looking for more information about Two notes Audio Engineering? Your first port of call is the Two notes website. Here you will find:

• News about the company and our product portfolio
• Comprehensive information about GENOME
• Firmware & software updates across the entire Two notes product portfolio
• Access to the Two notes Store where you can buy new DynIR™ Virtual Cabinets
• An official forum where you can share tips and advice with other Torpedo users.

You can also follow us on Facebook, Instagram and Twitter - we also have a group on Facebook where customers from all over the world get together to discuss gear and tone, would be great to see you there!

To stay up-to-date with the latest news, releases and promotions from Two notes, please subscribe to our newsletter here.