User Tools

Site Tools


torpedo_live:torpedo_live_user_s_manual

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
torpedo_live:torpedo_live_user_s_manual [2018/05/09 12:06]
guillaume.pille
torpedo_live:torpedo_live_user_s_manual [2018/12/05 12:10] (current)
guillaume.pille [2 In the studio]
Line 424: Line 424:
 Plug your 8 ohms out on your amplifier to the SPEAKER input of the Torpedo Live. If you want to use a preamplifier,​ Plug your 8 ohms out on your amplifier to the SPEAKER input of the Torpedo Live. If you want to use a preamplifier,​
 plug its line output to the LINE INPUT of the machine. Connect the S/PDIF OUT of the Torpedo Live to the S/PDIF IN of your audio interface. The sampling frequency can be set to 48KHz or 96KHz. plug its line output to the LINE INPUT of the machine. Connect the S/PDIF OUT of the Torpedo Live to the S/PDIF IN of your audio interface. The sampling frequency can be set to 48KHz or 96KHz.
 +
 +|< 100% 10% 90% >|
 +| {{:​attention.png?​100}} | **By pluggin a 1/4" jack into the Line input, your disconnect the Speaker input signal. It is safe if you have an amplifier connected on the loadbox, but only the signal coming from the Line input will be processed and be heard at the output.**|
  
 In this configuration the Torpedo Live is the master of the S/PDIF communication. This way, analog to digital In this configuration the Torpedo Live is the master of the S/PDIF communication. This way, analog to digital
torpedo_live/torpedo_live_user_s_manual.1525860387.txt.gz ยท Last modified: 2018/05/09 12:06 by guillaume.pille