User Tools

Site Tools


torpedo_captor:torpedo_captor_user_s_manual

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
torpedo_captor:torpedo_captor_user_s_manual [2018/06/05 10:27]
dilan.hookoomsing [3.2.2 Attenuator]
torpedo_captor:torpedo_captor_user_s_manual [2018/07/20 13:19] (current)
bruno.ferren [4.3.3 Power attenuation]
Line 396: Line 396:
  
 The THRU output is useful to insert the Captor between your amp and speaker cabinet, as a mean to simply pick up the sound of the amp. You can keep a speaker cabinet on stage for direct monitoring, and still get a properly picked-up sound with speaker simulation in the PA. The THRU output is useful to insert the Captor between your amp and speaker cabinet, as a mean to simply pick up the sound of the amp. You can keep a speaker cabinet on stage for direct monitoring, and still get a properly picked-up sound with speaker simulation in the PA.
 +
 +Use a standard speaker cable between the THRU output and the speaker cabinet.
 ==== - Power attenuation ​ ==== ==== - Power attenuation ​ ====
  
 {{  captor_att.jpg?​200}} {{  captor_att.jpg?​200}}
-The ATT output provides a -20dB attenuation. Just plug a speaker cabinet in the ATT output, and crank up your amp while keeping a manageable volume.+The ATT output provides a -20dB attenuation. Just plug a speaker cabinet in the ATT output ​(use a standard speaker cable for this connection), and crank up your amp while keeping a manageable volume.
  
 The speaker cabinet plugged in the ATT output can have a different impedance than the amp. However, this will lead to changing the attenuation ratio, which may vary from the designed -20dB. The speaker cabinet plugged in the ATT output can have a different impedance than the amp. However, this will lead to changing the attenuation ratio, which may vary from the designed -20dB.
Line 586: Line 588:
 ===== - Speaker sim =====  ===== - Speaker sim ===== 
  
-Guitar or Bass, analog, based on acclaimed Torpedo virtual cabinets+Guitar or Bass, analog, based on acclaimed Torpedo virtual cabinets.\\ 
 + 
 +Guitar : based on Brit VintC (4x12) - Dyn57\\ 
 +Bass : based on Fridge (8x10) / Alu XL (4x10) - Cnd87
  
 ===== - Power =====  ===== - Power ===== 
Line 592: Line 597:
 Power is required only for the XLR DI output and speaker simulation.\\ Power is required only for the XLR DI output and speaker simulation.\\
 Phantom power or DC jack, 2.1×5.5mm, negative center.\\ Phantom power or DC jack, 2.1×5.5mm, negative center.\\
 +Voltage : 9 to 24V DC\\
 Current : 5mA Current : 5mA
  
torpedo_captor/torpedo_captor_user_s_manual.1528187277.txt.gz · Last modified: 2018/06/05 10:27 by dilan.hookoomsing