User Tools

Site Tools


torpedo_cab_m:torpedo_c.a.b._m_user_s_manual

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
torpedo_cab_m:torpedo_c.a.b._m_user_s_manual [2019/07/22 18:17]
bruno.ferren [4.3.2 Simulation]
torpedo_cab_m:torpedo_c.a.b._m_user_s_manual [2019/10/14 19:25]
bruno.ferren [5.5 Technical Data]
Line 164: Line 164:
 When recording guitars or basses, it is common to apply a few effects to shape the sound before sending it to a PA or a recorder. In the Torpedo C.A.B. M you will find a simple but efficient EQ filter with three modes, GUITAR, BASS or CUSTOM. When recording guitars or basses, it is common to apply a few effects to shape the sound before sending it to a PA or a recorder. In the Torpedo C.A.B. M you will find a simple but efficient EQ filter with three modes, GUITAR, BASS or CUSTOM.
  
-==== - Room reverb ​====+==== - Reverb ​====
  
-One of the latest additions to our Torpedo firmware is a room reverb. When recording a guitar or a bass, the room sound is really important, especially with distant miking. With the Torpedo C.A.B. M, you get the option to choose how the record room sounds!+One of the latest additions to our Torpedo firmware is the reverb. When recording a guitar or a bass, the room sound is really important, especially with distant miking. With the Torpedo C.A.B. M, you get the option to choose how the recording environment ​sounds!
  
 ==== - The Torpedo technology, convolution and Impulse Responses ==== ==== - The Torpedo technology, convolution and Impulse Responses ====
Line 227: Line 227:
  
 {{ :​torpedo_cab_m:​schema_CABM_loadbox.jpg?​600 }} {{ :​torpedo_cab_m:​schema_CABM_loadbox.jpg?​600 }}
-Connect the speaker output of the amp to the AMP IN of the C.A.B. M, then connect the SPEAKER OUT of the pedal to  a loadbox (such as the [[https://​www.two-notes.com/​fr/​torpedo-captor|Torpedo Captor]]). The SPEAKER OUT is an uncompensated output (meaning without any kind of filter/​analog speaker simulation, a dry output). ​+Connect the speaker output of the amp to the AMP IN of the C.A.B. M, then connect the SPEAKER OUT of the pedal to  ​the amp/speaker input of a loadbox(depending of the loadbox you will use, the input is either described Amp input or Speaker input) of a loadbox (such as the [[https://​www.two-notes.com/​fr/​torpedo-captor|Torpedo Captor]]).Depending of the loadbox you will use, the input is either described Amp input or Speaker input. The SPEAKER OUT of C.A.B. M is an uncompensated output (meaning without any kind of filter/​analog speaker simulation, a dry output). ​
  
 It is also possible to plug the loadbox before the C.A.B. M this way:  It is also possible to plug the loadbox before the C.A.B. M this way: 
Line 235: Line 235:
 ===== - Remote control ===== ===== - Remote control =====
  
-\\ \\ 1. With a computer+\\ \\ With a computer
  
-The Torpedo C.A.B. M is a standalone unit, but you can control it from your computer (PCWindows or Mac OSX) with the Torpedo Remote software using a USB connection Create, save and load presets, load new cabinets or Impulse Response (IR) files. Download the Torpedo Remote for free on the [[http://​www.two-notes.com/​|Two notes Audio Engineering]] website.+The Torpedo C.A.B. M is a standalone unit, but you can control it from your computer (PCWindows or Mac OSX) with the Torpedo Remote software using a USB connection Create, save and load presets, load new cabinets or Impulse Response (IR) files. Download the Torpedo Remote for free on the [[http://​www.two-notes.com/​torpedo-remote|Two notes Audio Engineering]] website. See the [[https://​wiki.two-notes.com/​doku.php?​id=torpedo_cab_m:​torpedo_c.a.b._m_user_s_manual#​torpedo_remote|section 4.4]] in this owner'​s manual dedicated to Torpedo Remote.
  
-\\ \\ 2. With a mobile device+\\ \\ With a mobile device
  
 You can also control the Torpedo C.A.B. M from a mobile device (tablet or phone) with Torpedo Wireless Remote. You will have access to all the parameters of the unit. Unlike the Torpedo Remote used with a computer via USB, you will not be able to load new cabinets or IRs in the pedal through your mobile device. You can also control the Torpedo C.A.B. M from a mobile device (tablet or phone) with Torpedo Wireless Remote. You will have access to all the parameters of the unit. Unlike the Torpedo Remote used with a computer via USB, you will not be able to load new cabinets or IRs in the pedal through your mobile device.
Line 395: Line 395:
 The Simulation mode gives you access to every parameters available to create a preset. The Simulation mode gives you access to every parameters available to create a preset.
  
-The interface of the Arcade ​mode has 4 specific sections, detailled hereunder.+The interface of the Simulation ​mode has 4 specific sections, detailled hereunder.
  
 <WRAP group> <WRAP group>
Line 517: Line 517:
  
 <WRAP half column> <WRAP half column>
-**Custom ​Mode** : Instead of having fixed frequencies to work with, you have band semi parametric eq with a low cut filter. ​+**Custom ​mode** : Instead of having fixed frequencies to work with, the Custom mode gives you access to band semi parametric eq (12 dB per octave slope). The bands are as follow:  
 +  * **Low Cut**: ​low cut, 10 - 500Hz 
 +  * **Low**: low shelf, 60 - 240 Hz, +/-20dB 
 +  * **LMid**: peak, 180 - 720 Hz, +/-20dB 
 +  * **Mid**: peak, 400 - 1600 Hz, +/-20dB 
 +  * **HMid**: peak, 1 - 4 kHz, +/-20dB 
 +  * **High**: high shelf, 3 - 12 kHz, +/-20dB
 </​WRAP>​ </​WRAP>​
 </​WRAP>​ </​WRAP>​
Line 531: Line 537:
  
 <WRAP half column> <WRAP half column>
-**Room**: The room type determines the type of reverb you will apply to your guitar or bass tone. You have access to 8 different ​rooms: Studio A & B, Hall A & B, Cathedral, Crypt, Basement and Loft. \\+**Room**: The room type determines the type of reverb you will apply to your guitar or bass tone. You have access to 8 different ​environments: Studio A & B, Hall A & B, Cathedral, Crypt, Basement and Loft. \\
 **Dry/​Wet**:​ Determines the amount of reverb to be applied to you tone. **Dry/​Wet**:​ Determines the amount of reverb to be applied to you tone.
 </​WRAP>​ </​WRAP>​
Line 962: Line 968:
 | **THD+N ratio** ​          | 0.03% (IN LEVEL 0dB, sine wave 1kHz 4dBu)                                                                                                                                                                                                                                 | | **THD+N ratio** ​          | 0.03% (IN LEVEL 0dB, sine wave 1kHz 4dBu)                                                                                                                                                                                                                                 |
 | **SNR** ​                  | 91dB                                                                                                                                                                                                                                                                      | | **SNR** ​                  | 91dB                                                                                                                                                                                                                                                                      |
 +| **Memory Card** ​          | Supports standard capacity cards (512 bytes block size only) \\ and high capacity cards up to 32GB.                                                                                                                                                                                                                                                                      |
 | **Power supply** ​         | Mains power adaptor DC Jack 2.1mm, negative center\\ Input voltage: 12V DC\\ Power: approx. 2 W\\ Current draw: 140mA typical, 200mA max                                                                                                                                  | | **Power supply** ​         | Mains power adaptor DC Jack 2.1mm, negative center\\ Input voltage: 12V DC\\ Power: approx. 2 W\\ Current draw: 140mA typical, 200mA max                                                                                                                                  |
 | **Dimensions** ​           | Width: 100mm including connectors\\ Depth: 121mm\\ Height: 60mm including knobs\\ Weight: 450 g                                                                                                                                                                           | | **Dimensions** ​           | Width: 100mm including connectors\\ Depth: 121mm\\ Height: 60mm including knobs\\ Weight: 450 g                                                                                                                                                                           |
torpedo_cab_m/torpedo_c.a.b._m_user_s_manual.txt · Last modified: 2019/10/14 19:25 by bruno.ferren