User Tools

Site Tools


le_preamp_series:le_preamp_series_user_s_manual

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
le_preamp_series:le_preamp_series_user_s_manual [2018/01/08 11:18]
bruno.ferren [3.1 Side views]
le_preamp_series:le_preamp_series_user_s_manual [2018/06/06 10:01] (current)
dilan.hookoomsing [Table]
Line 179: Line 179:
  
 |< 100% 10% 20% 70% >| |< 100% 10% 20% 70% >|
-| 1 | Channel B footswitch | This footswitch activates the clean Channel B or changes the page/​parameter in MIDI programming. If the Channel A is already selected, pressing a second time will put your Le Preamp in bypass mode | +{{tablelayout?​rowsHeaderSource=Auto}} 
-| 2 | Instrument input | Connect a 1/4" unbalanced shielded cable to your guitar or bass. | +| 1   ​| Channel B footswitch ​    ​| This footswitch activates the clean Channel B or changes the page/​parameter in MIDI programming. If the Channel A is already selected, pressing a second time will put your Le Preamp in bypass mode                                                                                                                                                                                                                      
-| 3 | Thru output |Connect a 1/4" unbalanced shielded cable to feed an amplifier with your instrument signal. This can be useful on stage of you want to keep an amp as monitor, or to record the dry signal from the guitar in studio.| +| 2   ​| Instrument input         ​| Connect a 1/4" unbalanced shielded cable to your guitar or bass.                                                                                                                                                                                                                                                                                                                                                          
-| 4 | FX Loop Send output | Plug here a 1/4" unbalanced shielded cable to send the preamp signal to the pedals you want to put after the preamp stage. The FX Loop is bypassed when the Le Preamp is bypassed. In other words, the effects pedal that you put in this loop won’t be heard when your Le Preamp is bypassed. That is very interesting in case you have several Le Preamp and you wish to assign specific effects to each preamp.| +| 3   ​| Thru output ​             | Connect a 1/4" unbalanced shielded cable to feed an amplifier with your instrument signal. This can be useful on stage of you want to keep an amp as monitor, or to record the dry signal from the guitar in studio. ​                                                                                                                                                                                                     
-| 5 | MIDI input | Connect a MIDI controller (to remotely control your Le Preamp) or another Le Preamp to this input. Use only a cable featuring a 5-pin DIN connector with all the pins wired (some cables only have pins 4, 2 and 5 connected). Pin 1 and 3 are used to carry the Multi-channel message.| +| 4   ​| FX Loop Send output ​     | Plug here a 1/4" unbalanced shielded cable to send the preamp signal to the pedals you want to put after the preamp stage. The FX Loop is bypassed when the Le Preamp is bypassed. In other words, the effects pedal that you put in this loop won’t be heard when your Le Preamp is bypassed. That is very interesting in case you have several Le Preamp and you wish to assign specific effects to each preamp. ​       
-| 6 | Power adapter connector | Plug here your power adapter | +| 5   ​| MIDI input               ​| Connect a MIDI controller (to remotely control your Le Preamp) or another Le Preamp to this input. Use only a cable featuring a 5-pin DIN connector with all the pins wired (some cables only have pins 4, 2 and 5 connected). Pin 1 and 3 are used to carry the Multi-channel message. ​                                                                                                                                  ​
-| 7 | Headphones output | Plug your headphones and play in the middle of the night without disturbing anybody! With headphones, and in case you don’t have speaker simulator such as a Torpedo C.A.B. in the FX loop, we recommend you activate the analog speaker simulation | +| 6   ​| Power adapter connector ​ | Plug here your power adapter ​                                                                                                                                                                                                                                                                                                                                                                                             
-| 8 | Speaker Simulation | This analog speaker simulation is specifically voiced for your Le Preamp Model, and based on our Torpedo simulator. This speaker simulation affects the DI output and the Headphones output. | +| 7   ​| Headphones output ​       | Plug your headphones and play in the middle of the night without disturbing anybody! With headphones, and in case you don’t have speaker simulator such as a Torpedo C.A.B. in the FX loop, we recommend you activate the analog speaker simulation ​                                                                                                                                                                      ​
-| 9 | Ground Lift | switch If your DI output signal suffers from unwanted noise (interferences,​ hum), lifting the ground can lower the noise level. +| 8   ​| Speaker Simulation ​      ​| This analog speaker simulation is specifically voiced for your Le Preamp Model, and based on our Torpedo simulator. The simulation is based on our classic Brit VintC 4×12 picked up with a Dyn57 for the Le Clean, Le Crunch, Le Lead and on a mix of the vintage Fridge 8×10 and more modern Alu XL 4×10, picked up with a Cnd87 for Le Bass. This speaker simulation affects the DI output and the Headphones output. ​ 
-| 10 | Balanced DI output | This direct balanced XLR output should be connected to a mixing desk, or a sound card for a recording. With the speaker simulation on that’s all you need to achieve a great sound! | +| 9   ​| Ground Lift              ​| ​                                                                                                                                                                                                                                                                                                                                                                                                                          
-| 11 | MIDI output | Connect this MIDI output to a MIDI device or another Le Preamp you wish to control with your preamplifier. | +| 10  | Balanced DI output ​      ​| This direct balanced XLR output should be connected to a mixing desk, or a sound card for a recording. With the speaker simulation on that’s all you need to achieve a great sound! ​                                                                                                                                                                                                                                      ​
-| 12 | FX Loop Return Input | Plug here an unbalanced 1/4" cable connected to the last pedal you put in the loop. The FX Loop is bypassed when the Le Preamp is bypassed. | +| 11  | MIDI output ​             | Connect this MIDI output to a MIDI device or another Le Preamp you wish to control with your preamplifier. ​                                                                                                                                                                                                                                                                                                               
-| 13 | Instrument output | Connect this output with a 1/4" unbalanced shielded cable either to a power amplifier or a speaker simulator such as the Torpedo C.A.B., or directly into your digital audio interface for a recording. | +| 12  | FX Loop Return Input     ​| Plug here an unbalanced 1/4" cable connected to the last pedal you put in the loop. The FX Loop is bypassed when the Le Preamp is bypassed. ​                                                                                                                                                                                                                                                                              ​
-| 14 | Channel A footswitch | This footswitch activates the A "​dirty"​ channel or enter a page in MIDI programming. If the channel B is already selected, pressing a second time will put your Le Preamp in bypass mode. |+| 13  | Instrument output ​       | Connect this output with a 1/4" unbalanced shielded cable either to a power amplifier or a speaker simulator such as the Torpedo C.A.B., or directly into your digital audio interface for a recording. ​                                                                                                                                                                                                                  ​
 +| 14  | Channel A footswitch ​    ​| This footswitch activates the A "​dirty"​ channel or enter a page in MIDI programming. If the channel B is already selected, pressing a second time will put your Le Preamp in bypass mode.                                                                                                                                                                                                                                 ​|
  
 ===== - Front view ===== ===== - Front view =====
le_preamp_series/le_preamp_series_user_s_manual.1515406725.txt.gz · Last modified: 2018/01/08 11:18 by bruno.ferren